Configure A Dhcp L2 Relay Vlan - NETGEAR M4100 Series User Manual
Managed switch
Hide thumbs
Also See for M4100 Series:
- Reference manual (578 pages) ,
- Hardware installation manual (34 pages) ,
- Software setup manual (27 pages)
Table of Contents
Advertisement
Configure a DHCP L2 Relay VLAN
To configure a DHCP L2 Relay VLAN:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Services > DHCP L2 Relay > DHCP L2 Relay Global Configuration.
8.
Use Admin Mode to enable or disable the DHCP L2 Relay on the switch.
The default is Disable.
VLAN ID shows the VLAN ID configured on the switch.
9.
Use Admin Mode to enable or disable the DHCP L2 Relay on the selected VLAN.
10.
Use Circuit ID Mode to enable or disable the Circuit ID suboption of DHCP Option-82.
11.
Use Remote ID String to specify the Remote ID when Remote ID mode is enabled.
M4100 Series Managed Switch
Configure System Information
70
Hide quick links:
Advertisement
Table of Contents
