Show Supported Switchtype - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Model Identifier
The model identifier for this switch. Model Identifier is a 32-character field assigned by
the device manufacturer to identify the device.
Switch Status
The switch status. Possible values are OK, Unsupported, Code Mismatch, Config
Mismatch, or Not Present.
Switch
The switch description.
Description
Expected Code
The expected code version.
Version
Detected Code
The version of code running on this switch. If the switch is not present and the data is
Version
from pre-configuration, then the code version is "None".
Detected Code in
The version of code that is currently stored in FLASH memory on the switch. This code
Flash
executes after the switch is reset. If the switch is not present and the data is from
pre-configuration, then the code version is "None".
Up Time
The system up time.

show supported switchtype

This commands displays information about all supported switch types or a specific switch
type.
Format
show supported switchtype [<switchindex>]
Mode
User EXEC
Privileged EXEC
If you do not supply a value for <switchindex>, the following output appears:
Term Definition
Switch Index (SID)
The index into the database of supported switch types. This index is used when
preconfiguring a member to be added to the stack.
Model Identifier
The model identifier for the supported switch type.
Management
The management preference value of the switch type.
Preference
Code Version
The code load target identifier of the switch type.
If you supply a value for <switchindex>, the following output appears:
Term Definition
Switch Type
The 32-bit numeric switch type for the supported switch.
Model Identifier
The model identifier for the supported switch type.
Switch
The description for the supported switch type.
Description
ProSafe Managed Switch
Stacking Commands
28