Show Supported Switchtype - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Admin
Management
Preference
Switch Type
Model Identifier
Switch Status
Switch
Description
Expected Code
Version
Detected Code
Version
Detected Code in
Flash
Up Time

17.1.15 show supported switchtype

This commands displays information about all supported switch types or a specific switch
type.
Format
Mode
Stacking Commands
The administrative management preference value assigned to
the switch. This preference value indicates how likely the
switch is to be chosen as the Primary Management Unit.
The 32-bit numeric switch type.
The model identifier for this switch. Model Identifier is a 32-
character field assigned by the device manufacturer to iden-
tify the device.
The switch status. Possible values are OK, Unsupported,
Code Mismatch, Config Mismatch, or Not Present.
The switch description.
The expected code version.
The version of code running on this switch. If the switch is
not present and the data is from pre-configuration, then the
code version is "None".
The version of code that is currently stored in FLASH mem-
ory on the switch. This code executes after the switch is reset.
If the switch is not present and the data is from pre-configura-
tion, then the code version is "None".
The system up time.
show supported switchtype [switchindex]
User EXEC
v3.0, January 2008
17-9