Table of Contents
Advertisement
reset stack
User level: privileged, supervisor.
Use the reset stack command to perform a hardware reset of the entire stack.
The syntax for this command is:
reset stack
reset wan
User level: user, privileged, supervisor
Use the reset wan command to perform a software reset in the X330 WAN Access
Router Module.
The syntax for this command is:
reset wan [module][bank-a]
To reset a WAN module residing on switch 2:
module
bank-a
retstatus
User level: supervisor
Use the retstatus to display the return status of the previously executed
command.
The syntax for this command is:
retstatus
Example:
P330-N# retstatus
Succeeded
Avaya P330-ML Reference Guide
Chapter 2
Optional - the module number where the WAN module to be
reset resides.
Optional - boot the WAN module from bank-a after reset.
Avaya P330-ML Layer 2 CLI Commands
55
Advertisement
Table of Contents
