Ip Ospf Router-Id Command; Redistribute Command; Timers Spf Command - Avaya P334T-ML User Manual

ip ospf router-id Command

Use the ip ospf router-id command to configure router identity. The no
form of this command returns the router identity to its default (lowest IP interface
that exists).
The syntax for this command is:
[no] ip ospf router-id <router id>
router id
Example:
Router-N# ip ospf router-id 192.168.49.1

redistribute Command

Use the redistribute command to redistribute routing information from other
protocols into OSPF. The no form of this command disables redistribution by
OSPF.
The syntax for this command is:
[no] redistribute <protocol>
protocol
Example:
Router-N(configure router:ospf)# redistribute static

timers spf Command

Use the timers spf command to configure the delay between runs of OSPF's
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf <spf-holdtime>
spf-holdtime
Example:
Router-N(configure router:ospf)# timers spf 5
P334T-ML User's Guide
IP address
[static | ospf]
The time in seconds of the delay between runs of
OSPF's SPF calculation.
Chapter 7 CLI – Layer 3
187