Ip Vrrp Preempt; Ip Vrrp Primary - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Use the no ip vrrp override addr owner command to discard these packets.
The syntax for this command is:
[no] ip vrrp <vr-id> override addr owner
vr-id
Example:
Router-1(configure-if:marketing) # ip vrrp 1 override addr
owner
Done!

ip vrrp preempt

User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
Use the ip vrrp preempt command to configure the router to preempt a lower
priority master for the virtual router ID.
Use the no ip vrrp preempt command to disable preemption for the virtual
router instance.
By default, preemption is enabled.
The syntax for this command is:
[no] ip vrrp <vr-id> preempt
vr-id
Example:
Router-1(configure-if:marketing) # ip vrrp 1 preempt
Done!

ip vrrp primary

User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
56
Virtual Router ID (1-255)
Virtual Router ID (1-255)
Avaya P460 Reference Guide