Example:
Router-N> show ip interface brief
Showing 1 Interfaces
Interface
-------------------- --------------- --------------- --------------------
net
show ip ospf
User level: user, privileged, supervisor
Use the show ip opsf command to displays general information about OSPF
routing.
The syntax for this command is:
show ip ospf
Example:
Router-N> show ip ospf
Routing Process OSPF with ID 149.49.75.222
Number of areas in this router is 1
Area 0.0.0.0
Number of Interfaces in this area 0
SPF algorithm executed 1 times
SPF hold time is 3 sec
show ip ospf database
User level: user, privileged, supervisor
Displays lists of information related to the OSPF database for a specific router.
The syntax for this command is:
show ip ospf database [<ls type>]
ls-types:
asbr-summary
router
Avaya P330-ML Reference Guide
Chapter 3
Address
149.49.54.56
255.255.255.0
Displays information only about the autonomous
system boundary router summary LSAs. Optional.
Displays information only about the router LSAs.
Optional.
Avaya P330-ML Layer 3 CLI Commands
Mask
Status
up
255