Show Ip Arp Command; Show Ip Reverse-Arp Command - Avaya P334T-ML User Manual

show ip arp Command

Use the show ip arp command to display the Address Resolution Protocol
(ARP) cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
if-name
vlan
ip-addr
ip-mask
static
Example:
show ip arp
show ip arp marketing
show ip arp 192.168.49.1
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show ip arp marketing_vlan
show ip arp static
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

show ip reverse-arp Command

Use this command to display the IP address of a host, based on a known MAC
address.
The syntax for this command is:
show ip reverse-arp <mac addr> [<match len>]
mac addr
match len
P334T-ML User's Guide
Interface name (string up to 32 chars)
VLAN NAME (string up to 16 chars) or VLAN ID (number)
The IP address of the station(s)
The ip mask of the routes.
Display static ip ARP information.
MAC address
The number of bytes in the address to match
Chapter 7
Display all ARP mapping
Display interface ARP mapping
Display one host ARP mapping
Display vlan ARP mapping
Display static ARP mapping
CLI – Layer 3
161