Show Ip Arp - Avaya P460 Reference Manual

The syntax for this command is:
Show ip access-lists[<policy-list-number>]
policy-list-number
Example:
Router-1> show ip access-lists
ip access-list 100 10 deny-and-notify tcp
192.168.55.0
any range
ip access-list 100 30 deny udp
any
any
optional
ip access-list 100 35 deny ip
any
any
ip access-list 100 55 fwd7 tcp
host 192.168.3.4
host 10.6.7.8
default action for list 100 is permit

show ip arp

User level: read-only, read-write, admin.
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
if-name
vlan
ip-addr
ip-mask
static
Avaya P460 Reference Guide
The policy list number (integer from 100 to 199)
0.0.0.255
7000 8000
eq
Interface name (string up to 32 chars)
VLAN NAME (string up to 16 chars) or VLAN ID (number)
The IP address of the station(s)
The ip mask of the routes.
Display static ip ARP information.
Chapter 2 Avaya P460 CLI Commands
range 5000
33333
6000
131