Show Boot Bank Command; Show Arp-Tx-Interval; Show Self-Loop-Discovery Command; Dir Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Show boot bank Command

Use the show boot bank command to display the Avaya P330 boot bank.
The syntax for this command is:
show boot bank
Example:
Cajun_P330-N> show boot bank

Show arp-tx-interval

Use the show arp-tx-interval command to display the keep-alive time.
The syntax for this command is:
show arp-tx-interval
Example:
Cajun_P330-N> show arp-tx-interval
ARP tx interval is set to 5 seconds.

Show self-loop-discovery Command

Use the show self-loop-discovery command to display a module's IBM token ring
cable discovery status.
The syntax for this command is:
show self-loop-discovery [module num]
Example:
Cajun_P330-N> show self-loop-discovery 1
Self-Loop-Discovery is disabled on module 1.

Dir Command

The dir command is used to show the file types that have been downloaded to the
module.
The syntax for this command is:
dir [<mod_num>]
68 Avaya P333T User's Guide