Table of Contents
Advertisement
show ppp baud-rate
User level: user, privileged, supervisor
Use the show ppp baud-rate command to display the ppp baud-rate.
The syntax for this command is:
show ppp baud-rate
Example:
P330-N>show ppp baud-rate
PPP baud rate is 38400
show ppp configuration
User level: user, privileged, supervisor
Use the show ppp configuration command to display the ppp configuration.
The syntax for this command is:
show ppp configuration
Example:
P330-N>show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 15 minutes
PPP Authentication Parameters:
------------------------------
Incoming:
show ppp incoming timeout
User level: user, privileged, supervisor
Use this show ppp incoming timeout command to display the amount of time
in minutes that a PPP session can remain idle before being automatically
disconnected.
The syntax for this command is:
show ppp incoming timeout
Avaya P330-ML Reference Guide
Chapter 2
None
Avaya P330-ML Layer 2 CLI Commands
173
Advertisement
Table of Contents
