Show Event-Log; Show Event-Log (Layer 3) - Avaya P460 Reference Manual

The syntax for this command is:
show environment power
Example:
P460 > show environment power
PSU1 Capacity: 300 Watts (48V @ 6.25 Amps)
PSU2 Capacity: none
PSU3 Capacity: none
PSUs Configuration:
Total Power Available: 300 Watts (6.25 Amps @ 48V)
Total Power drawn from the system: 238 Watts (4.95 Amps @ 48V)
Remaining Power in the system: 62 Watts (1.29 Amps @ 48V)
Slot
----
3
4
5
6
*- 2 SPVs power consumption: 70(W) x 2, Fans power consumption: 50(W)

show event-log

User level: read-only, read-write, admin.
Displays the encrypted event log file.
The syntax for this command is:
show event-log

show event-log (Layer 3)

User level: read-only, read-write, admin.
Displays the encrypted event log file.
The syntax for this command is:
show event log
Avaya P460 Reference Guide
1 PSU/s , no redundancy.
Card-Type
--------------------
avayaP460-M4648ML-T
Chapter 2
Active Enabled Draws(W)
------- ------- ---------
N Y
Y Y
N Y
N Y
Avaya P460 CLI Commands
Fault
-----
0
48
0
0
129