Gestetner B070 Service Manual page 1099

Tech Service Bulletin No. B070/B071 – 035
5. FINISHER /Z-FOLDING SP MODES:
The following service program modes have been added for the SR841 Finisher (B706) and "Z-folding Unit
Type 2105" (B660).
New SP modes for the Z-Folding Unit Type 2105:
New SR841 Finisher Input/Output Checks:
Finisher Input Check: SP6117.
Class
Bit
3
No.
No.
7 Not Used
6 Shift Tray Full Sensor – Z-folding
5 Bottom Fence HP Sensor
4 Top Fence HP Sensor
3 Emergency Stop Switch
6
Shift Jogger Lift HP Sensor (Optional
2
Jogger Unit)
Shift Jogger HP Sensor (Optional
1
Jogger Unit)
0 Optional Jogger Unit Connection
NOTE: The Sensors In Bold Have Been Added.
Finisher Output Check: SP6118
26 Jogger Top Fence Motor
27 Jogger Bottom Fence Motor
NOTE: The motors in bold have been added.
CÓPIA NÃO CONTROLADA
SP6122 001-008 Fine Adjustment – 1st Fold Position
[-4 ~ +4/0/ 0.2 mm]
Adjusts the position of the first fold [A] to decrease or
increase the distance (A) between the leading edge [B]
and the crease of the 2nd fold [C].
SP6122 009-016 Fine Adjustment – 2nd Fold Position
[-4 ~ +4/0/ 0.2 mm]
Adjusts the position of the 2nd fold [C] to decrease or
increase the length (L1) of the sheet between the
trailing edge [D] and the 2nd fold.
Description
CÓPIA NÃO CONTROLADA
Reading
0
Not full
Not home position
Not home position
Not press
Home position Not home position
Not home position
Connection
1
Full
Home position
Home position
Press
Home position
Not connection
Page 7 of 7