Gestetner B070 Service Manual page 1053

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 9002/10512
LANIER – LD090/LD0105
RICOH – AFICIO 2090/2105
SAVIN – 4090/40105
SUBJECT: PICK-UP ROLLER
GENERAL:
Due to parts standardization with a newer model, the Pick-Up Roller (One-Way Clutch Assembly) has
been separated into an individual pick-up roller and clutch. The following parts updates are being issued
for all B023 Parts Catalogs. Please update your parts catalog with the following information.
NOTE: Initially both of these parts must be replaced as a set, but can be replaced individually thereafter.
Item 37 P/N B4772226
Pick-Up Roller: Coupling
OLD PART NO. NEW PART NO.
A8061321
* DENOTES NEW ITEM NUMBER
UNITS AFFECTED:
The serial number cut-in information was not available at time of this publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
Copyright  2004 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B070/B071 – 022
Pick-up Roller
B4772225 Pick-up Roller
B4772226 Pick-up Roller: Coupling
CÓPIA NÃO CONTROLADA
Item 31 P/N B4772225
Pick-Up Roller
DESCRIPTION
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
01/12/2003
REFERENCE
QTY INT PAGE ITEM
1 3/S 29 31
1 3/S 29 37*
Page 1 of 1