Gestetner B070 Service Manual page 1044

Tech Service Bulletin No. B070/B071 – 019
3. Finally, the Rear Frame Spring Plate shown below is attached.
UNITS AFFECTED:
All B070/B071 copiers manufactured after the serial numbers listed below will have the new
Terminal:Bias:Transfer installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
CÓPIA NÃO CONTROLADA
A2943868
MODEL NAME
Gestetner 9002 J7030100001
Lanier LD090
Ricoh Aficio 2090
Savin 4090
Gestetner 10512 J7130100001
Lanier LD0105
Ricoh Aficio 2105
Savin 40105
CÓPIA NÃO CONTROLADA
SERIAL NUMBER
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
Page 3 of 3