Configuration and Image Commands
unconfigure wireless ports image-configuration
unconfigure wireless ports <portlist |all> image-configuration runtime
Description
This command unconfigures the runtime image configuration for the specified wireless port or ports.
Syntax Description
portlist
Specifies one or more ports or slots and ports. an be one or more port numbers. May be in the form 1,
2, 1:2, 3-5.
all
Specifies all ports.
Usage Guidelines
Use this command to unconfigure the runtime image for the specified wireless port or ports.
You cannot unconfigure the runtime configuration of a wireless port that is enabled. You must disable
the port first.
Examples
The following command unconfigures the runtime image for port 1:18 on the Summit 300-48:
unconfigure wireless ports 1:18 image-configuration runtime
History
This command was introduced in ExtremeWare 7.5.
This command was modified in ExtremeWare 6.6 to exclude the
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1158
and
bootstrap
bootloader
ExtremeWare 7.7 Command Reference Guide
options.