Nortel Contact Center Multimedia Installation And Maintenance Manual page 1571

October 2007
first-level threshold
The value that represents the lowest value of the normal range for a statistic in a
threshold class. The system tracks how often the value for the statistic falls
below this value.
Flow Control Threshold
The number of calls required to reopen a closed network skillset queue. This
value must be less than the Call Request Queue Size. For Network Skill-Based
Routing, Flow Control Threshold (FCTH) is configured in Contact Center
Manager Administration. If the NACD fallback or the Queue_to_NACD script
command is used, FCTH must be configured in LD23 on the switch. See also
Call Request Queue Size.
G
global settings
Settings that apply to all skillsets or IVR ACD-DNs configured on your system.
global variable
A variable that contains values that can be used by any script on the system. You
can only change the value of a global variable in the Script Variable Properties
sheet. You cannot change it in a script. See also call variable, variable.
GOS
See grade of service.
grade of service
The probability that calls are delayed by more than a certain number of seconds
while waiting for a port.
H
HDX
See Host Data Exchange.
Host Data Exchange
A rich scripting language provided with Contact Center Manager to control
treatment of calls.
Installation and Maintenance Guide 1571