T320 Dc Power Distribution; Figure 35: Typical Dc Source Cabling To The Router - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide
Related
Documentation

T320 DC Power Distribution

Related
Documentation
98
T320 Power System Description on page 83
T320 Site Preparation Checklist Requirements on page 89
Maintaining the T320 Power Supplies on page 284
T320 General Electrical Safety Guidelines and Electrical Codes on page 353
Most sites distribute DC power through a main conduit that leads to frame-mounted DC
power distribution panels, one of which might be located at the top of the rack that
houses the router. A pair of cables (one input and one return) connects each set of
terminal studs to the power distribution panel.
Figure 35 on page 98 shows a typical DC source cabling arrangement.

Figure 35: Typical DC Source Cabling to the Router

T320 Power System Electrical Specifications on page 96
T320 Power Requirements on page 96
T320 DC Power Cable Specifications on page 95
Copyright © 2018, Juniper Networks, Inc.