Replacing An M7I Ac Power Cord; Removing An M7I Ac Power Cord; Installing An M7I Ac Power Cord - Juniper M7i Hardware Manual

Replacing an M7i AC Power Cord

Removing an M7i AC Power Cord

See Also

Installing an M7i AC Power Cord

Copyright © 2019, Juniper Networks, Inc.
The AC power cord that plugs into the appliance inlet on the faceplate of each AC power
supply provides direct connection to the external power source.
Removing an M7i AC Power Cord on page 181
1.
Installing an M7i AC Power Cord on page 181
2.
Before removing the AC power cord from an M7i router with only one power supply, you
must power off the router. See
AC power cord:
Press the power switch on each power supply faceplate to the
1.
Unplug the power cord from the appliance inlet on the faceplate and from the power
2.
source receptacle.
M7i AC Power Electrical Safety Guidelines and Warnings on page 254
M7i Router AC Power Supply Specifications on page 85
Replacing an M7i AC Power Supply on page 177
Installing an M7i AC Power Cord on page 181
To install an AC power cord:
Locate a replacement power cord with the type of plug appropriate for your
1.
geographical location (see
Specifications" on page
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect
2.
the strap to one of the ESD points on the chassis.
Press the power switch on the power supply faceplate to the
3.
Insert the appliance coupler end of the replacement power cord into the appliance
4.
inlet on the power supply faceplate and insert the plug into an AC power source
receptacle.
Verify that the power cord does not block access to router components or drape where
5.
people could trip on it.
Press the power switch on the power supply faceplate to the
6.
Chapter 25: Replacing Power System Components
"Powering Off the M7i Router" on page
"M7i Router AC Power, Connection, and Power Cord
83).
126. To remove the
( ) position.
OFF O
( ) position.
OFF O
( ) position.
ON |
181