Mx480 Chassis; Mx480 Chassis Description - Juniper MX480 Hardware Manual

MX480 Chassis

IN THIS SECTION
MX480 Chassis Description | 30
MX480 Component Redundancy | 32
MX480 Router Hardware and CLI Terminology Mapping | 33
MX480 Craft Interface Description | 36
Alarm Relay Contacts on the MX480 Craft Interface | 37
Alarm LEDs and Alarm Cutoff/Lamp Test Button on the MX480 Craft Interface | 37
MX480 Component LEDs on the Craft Interface | 38
MX480 Cable Management Brackets | 41

MX480 Chassis Description

The router chassis is a rigid sheet metal structure that houses all the other router components (see
Figure 1 on page 31, Figure 2 on page
high, 17.45 in. (44.3 cm) wide, and 24.5 in. (62.2 cm) deep (from the front to the rear of the chassis). The
chassis installs in standard 800-mm (or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame
racks. Up to five routers can be installed in one standard 48-U rack if the rack can handle their combined
weight, which can be greater than 818 lb (371.0 kg).
31, and Figure 3 on page 32). The chassis measures 14.0 in. (35.6 cm)
30