Honda Accord 2008 Manual page 808

07/11/02 09:24:38 61TA0000_130_0035
6. Measure the thickness of 4th gear.
• If the thickness is less than the service limit,
replace 4th gear.
• If the thickness is within the service limit, replace
the 3rd/4th synchro hub and 3rd/4th synchro
sleeve as a set.
Standard:
Service Limit: 23.80 mm (0.937 in.)
＊０５
7. Measure the clearance between the distance collar
(A) and 5th gear (B) with a dial indicator (C). If the
clearance is more than the service limit, go to
step 8.
Standard:
Service Limit: 0.25 mm (0.010 in.)
＊０６
− −
23.92 23.97 mm (0.941 0.944 in.)
0.06 0.16 mm (0.002 0.006 in.) − −
C
A
8. Measure the length
shown.
• If the length
the distance collar.
• If the length
step 9.
Standard: 24.03 24.08 mm (0.946 0.947 in.)
9. Measure the thickness of 5th gear.
• If the thickness is less than the service limit,
replace 5th gear.
• If the thickness is within the service limit, replace
the 5th synchro hub and 5th synchro sleeve as a
set.
Standard:
Service Limit: 23.80 mm (0.937 in.)
B
of the distance collar as
is not within the standard, replace
is within the standard, go to
− −
− −
23.92 23.97 mm (0.941 0.944 in.)
(cont'd)
13-35
＊０７
＊０８