Honda Accord 2008 Manual page 795

07/11/02 09:24:30 61TA0000_130_0022
Manual Transmission
Transmission Installation (cont'd)
41. Remove the engine support hanger and the engine
hanger/adapter from the engine.
42. Install the evaporative emission (EVAP) canister
hose (A) and brake booster vacuum hose (B).
＊２３
B
43. Install the strut brace (A) and the nuts (B) then
install the harness clamp (C).
＊２４
13-22
B
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
B
8 x 1.25 mm
22 N·m
A
C
(2.2 kgf·m,
16 lbf·ft)
44. Install the bracket (A) and the harness clamp (B).
B
A
45. Install the harness clamp (A). Connect the output
shaft (countershaft) speed sensor connector (B) and
the back-up light switch connector (C).
C
A
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
B
＊２５
＊２６