Honda Accord 2008 Manual page 790

07/11/02 09:24:02 61TA0000_130_0017
5. Install the clutch cover (A) and the harness cover
(B).
＊０４
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
6. Install the intermediate shaft (see step 3 on page
16-27).
7. Install both driveshafts (see page 16-19).
8. Install the lower transmission mount (A) with new
bolts.
＊０５
B
A
A
9. Support the subframe with the subframe adapter
and a jack.
6 x 1.0 mm
9.8 N·m
10. Position the steering gearbox washers (A) on the
(1.0 kgf·m,
front subframe (B), and lift the subframe up to the
7.2 lbf·ft)
body.
10 x 1.25 mm
55 N·m
B
(5.6 kgf·m,
41 lbf·ft)
Replace.
F
E
12 x 1.25 mm
54 N·m
(55 kgf·m,
40 lbf·ft)
Replace.
11. Loosely install the new subframe mounting bolts
(C), the rear stiffener mounting bolts (D), the front
stiffener mounting bolts (E), the front stiffeners (F)
and the rear stiffeners (G).
VSB02C000016
D
12 x 1.25 mm
93 N·m
(9.5 kgf·m,
69 lbf·ft)
Replace.
A
G
F
C
D
14 x 1.5 mm
12 x 1.25 mm
103 N·m
54 N·m
(10.5 kgf·m,
(5.5 kgf·m,
76 lbf·ft)
40 lbf·ft)
Replace.
Replace.
(cont'd)
13-17
＊０６
＊０７