Honda Accord 2008 Manual page 769

07/11/02 09:15:18 61TA0000_120_0018
Clutch
Clutch Replacement (cont'd)
7. Inspect for warpage using a straight edge (A) and a
feeler gauge (B). Measure across the pressure plate
(C). If the warpage is more than the service limit,
replace the pressure plate.
Standard (New):
Service Limit:
＊０５
Clutch Disc Inspection and Removal
8. Remove the clutch disc (A) and the clutch
alignment tool set (B).
＊０６
B
07PAF-0020000
9. Inspect the lining of the clutch disc for signs of
slippage or oil. If the clutch disc looks burnt or is oil
soaked, replace it. If the clutch disc is oil soaked,
find and repair the source of the oil leak.
12-16
0.03 mm (0.001 in.) max.
0.15 mm (0.006 in.)
A
B
A
10. Measure the clutch disc thickness. If the thickness
is less than the service limit, replace the clutch disc.
Standard (New):
Service Limit:
C
11. Measure the rivet depth from the clutch disc lining
surface (A) to the rivets (B) on both sides. If the
rivet depth is less than the service limit, replace the
clutch disc.
Standard (New):
Service Limit:
−
7.3 7.9 mm
(0.287 0.311 in.) −
6.0 mm (0.24 in.)
−
1.15 1.75 mm
(0.045 0.069 in.) −
0.7 mm (0.03 in.)
B
A
＊０７
＊０８