Evap Canister Vent Shut Valve Replacement; Evap Canister Purge Valve Replacement - Honda Accord 2008 Manual

07/11/02 09:20:27 61TA0000_110_0431
EVAP Canister Vent Shut Valve
Replacement
1. Disconnect the EVAP canister vent shut valve 2P
connector (A).
2. Remove the cap (B).
＊０１
A
B
3. Remove the EVAP canister vent shut valve (C).
4. Install the parts in the reverse order of removal
with new O-rings (D) and a new cap.
NOTE: Do not coat the O-rings with oil.
ＴＡ０８ＡＥ４Ａ２０３２３４２５２１２ＫＢＡＴ００
C
D
EVAP Canister Purge Valve
Replacement
1. Disconnect the EVAP canister purge valve 2P
connector (A).
B
C
2. Disconnect the hoses (B), then remove the EVAP
canister purge valve (C).
3. Install the parts in the reverse order of removal.
ＴＡ０８ＡＥ４Ａ２０３２３４２５２２１ＫＢＡＴ００
＊０１
A
6 N·m
(0.6 kgf·m,
4 lbf·ft)
11-431 11-431