Honda Acura NSX 1991 Service Manual page 149

NOTE:
necting rod bolts to protect the crankshaft.
BDC for each cylinder.
CORRECT
9 x 0.75 mm
20 N-m (2.0 kg-m, 14 lb-ft)
after turn to 95O
MARK
rod cap.
INCORRECT
5. Check the rod bearing clearance with plastigage
(page 7-7). then torque the connecting rod cap
nuts.
NOTE: Reference numbers on connecting rods are
for big-end bore tolerance and do NOT indicate the
position of piston in engine.
CONNECTING ROD CAP NUT TORQUING
METHOD
(2.0 kg-m, 14 lb-ft) with a beam-type torque
wrench.
then turn the cap nut 95 degrees.
l eeo
I
7-19