Honda Acura NSX 1991 Service Manual page 151

6 x l . O m m
12 Nom (1.2 kg-m, 9 lb-ftl
Apply liquid
gasket to block
mating surfaces.
Replace.
NOTE:
l
Use liquid gasket, Part No. 087 18- 550000 OE.
dry before applying liquid gasket.
band, centered between edges of the mating
surface.
the inner threads of the bolt holes.
12
11. Install the oil pass pipe and joint.
12. Install the baffle plate.
13. Install the oil screen.
Apply liquid gasket
to inside of broken
line.
OIL PdMP
I
Apply liquid gasket
to inside of broken line.
have elapsed since applying liquid gasket.
instead reapply liquid gasket after removing old
residue.
filling the engine with oil.
CAUTION: Whenever any crankshaft or connec-
ting rod bearing is replaced, after reassembly, run
the engine at idling speed until it reaches normal
operating temperature, then continue to run for ap-
proximately 15 minutes.
COVER
7-21