Configuring The Cpe - Siemens RUGGEDCOM WIN5123 Installation Manual

Chapter 2
Installing the Device
Figure 21: Sealing Gaps with Putty
Section 2.9

Configuring the CPE

Once the CPE is installed and connected to the network, it must be configured. The RUGGEDCOM WIN5123
features a Web-based User Interface (UI) for all configuration management. For more information about
configuring the base station, refer to the RUGGEDCOM WIN CPE User Guide associated with the device and the
installed software release.
22
RUGGEDCOM WIN5123
Installation Guide
Configuring the CPE