T320 Chassis Alarm Messages; T320 Sonet/Sdh Alarm Messages; Table 65: Sonet/Sdh Interface Alarm Messages - Juniper Core Router T Series Hardware Manual

T320 Core Router Hardware Guide

T320 Chassis Alarm Messages

T320 SONET/SDH Alarm Messages

294
Chassis alarms indicate a problem with a chassis component such as the cooling system
or power supplies. For more information, see the following topics:
Troubleshooting the T320 Control Board on page 300
Troubleshooting the T320 Cooling System on page 297
Troubleshooting the T320 Craft Interface on page 295
Troubleshooting the T320 FPCs on page 301
Troubleshooting the T320 Host Subsystem on page 299
Troubleshooting the T320 PICs on page 302
Troubleshooting the T320 Power System on page 303
Troubleshooting the T320 SIBs on page 304
Troubleshooting the T320 SONET Clock Generators on page 296
Interface alarms indicate a problem with a specific network interface, as described in
Table 65 on page 294.

Table 65: SONET/SDH Interface Alarm Messages

LCD Message
interface-name so-x/x/x BERR-SD
interface-name so-x/x/x BERR-SF
interface-name so-x/x/x LAIS
interface-name so-x/x/x LOF
interface-name so-x/x/x LOL
interface-name so-x/x/x LOP
interface-name so-x/x/x LOS
interface-name so-x/x/x LRDI
interface-name so-x/x/x PAIS
interface-name so-x/x/x PLL
interface-name so-x/x/x PMIS
CLI Message
interface-name so-x/x/x - SONET bit error rate defect
interface-name so-x/x/x - SONET bit error rate fault
interface-name so-x/x/x - SONET line AIS
interface-name so-x/x/x - SONET loss of frame
interface-name so-x/x/x - SONET loss of light
interface-name so-x/x/x - SONET loss of pointer
interface-name so-x/x/x - SONET loss of signal
interface-name so-x/x/x - SONET line remote defect
indicator
interface-name so-x/x/x - SONET path AIS
interface-name so-x/x/x - SONET PLL lock
interface-name so-x/x/x - SONET path mismatch
Copyright © 2018, Juniper Networks, Inc.