Traffic Statistics Settings - Zte R800 Handbook

check interval(s) Check the heartbeat interval with server
number of checktimeout Check the overtime interval(s)
Portal server address IP address or domain name for connecting Portal server
Enable SSL Enable or disable SSL encryption connection
Portal server port HTTP port of Portal server
Portal server path Portal server path
Trusted MAC List(separate Trusted list of MAC address
by ',')
Domain name list(separate Trusted list of domain name
by ';')
Step 4 click "ok" to save Portal configuration.
5.3.6. T S S
RAFFIC TATISTICS ETTINGS
When using a wireless router, the users are concerned about the router traffic, so this function provides the traffic generated
by the router during wireless dial-up. The router will control the router online according to the set monthly traffic limit; when the
router generates traffic more than the monthly traffic limit, it will be disconnected from the network to prevent the user from
accessing the external network so as to limit the SIM card's over traffic. At the beginning of every month, the used traffic will be
cleared.
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in "5.2.1 Log onto the WEB Configuration
Interface".
Step 2: Click "Application Configuration > Traffic Statistics" to open the "Traffic Statistics" tab, as shown in Figure 5-3-6.
Step 3: Configure the Traffic Statistics parameters, as shown in Table 5-3-5.
Parameter Name Meaning
To enable Traffic Statistics.
Enable
Figure 5-3-5 Traffic Statistics Tab
Table 5-3-6 Traffic Statistics Parameters
37
10～500
Default as 60
1～60
Default as 60
Normally word type, 64 bytes at most.
Mark
1～65535
Default as 2060
Normally word type, 64 bytes at most.
MAC address， several usage of "； " for separation
Domain name， several usage of "； " for separation
How to Configure
Press the button to select.

Enable
R800
HANDBOOK