Routing Module; Session Module; Sntp Module - THOMSON ST780 WL Cli Reference Manual

Facility Severity
LOCAL1 INFO

Routing Module

Facility Severity
LOCAL1 INFO
LOCAL1 INFO
SECURITY INFO
SECURITY INFO

Session Module

Facility Severity
AUTH NOTICE

SNTP Module

Facility Severity
NTP WARNING
NTP WARNING
NTP WARNING
NTP INFO
NTP INFO
NTP WARNING
NTP ERROR
NTP ERROR
858
Contents
RIP IP Address <ip-address> not found in RIP table
Contents
GRP Default destination is routed via gateway <ip_address>
GRP Default destination is not routed anymore via gateway <ip_address>
LABEL Rule Id:<rule_id> Protocol: ICMP Src_ip: <ip_address> Dst_ip:
<ip_address> ICMP message type: <message_type_name || message_type_id >
Label: <label_name>
LABEL Rule Id:<rule_id> Protocol: <protocol_name> Src_ip: <ip_address>
Dst_ip: <ip_address> Label: <label_name>
Contents
SESSION TIMEOUT Timeout! (after <seconds> sec)
Contents
SNTP Unable to contact server: <SNTP server ip>
SNTP Server not synchronized: <SNTP server ip>
SNTP Invalid response from server: <SNTP server ip>
SNTP Synchronized to server: <SNTP server ip>
SNTP Synchronized again to server: <SNTP server ip>
SNTP Roundtrip exceeds limits
SNTP No server(s) configured, check configuration
SNTP Systemtime update: time setting <systemtime> > new time setting:
<new time>
System Logging Messages
E-DOC-CTC-20061027-0012 v2.0