Eth Switch Shaper Config - THOMSON ST780 WL Cli Reference Manual

eth switch shaper config

Configure common ingress shaper parameters.
SYNTAX:
eth switch shaper config
where:
shaper
unicast
multicast
broadcast
control
unknown
discard
RELATED COMMANDS:
eth switch shaper ifconfig
eth switch shaper iflist
320
shaper = <number{0-1}>
[unicast = <disabled|enabled>]
[multicast = <disabled|enabled>]
[broadcast = <disabled|enabled>]
[control = <disabled|enabled>]
[unknown = <disabled|enabled>]
[discard = <disabled|enabled>]
The shaper instance
Shape unicast traffic.
Shape multicast traffic.
Shape broadcast traffic.
Shape MAC control traffic.
Shape traffic with unknown destination address.
Discard frame at overflow (else attempt for flow control)
Configure per port shaper parameters.
Display shaper configuration per port.
Eth Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0