Wireless Secmode Wep - THOMSON ST780 WL Cli Reference Manual

Wireless Commands

wireless secmode wep

Configure the WEP settings.
i
If the current security mode is WEP, then the security mode must first be changed, before the WEP
settings can be (re)configured.
SYNTAX:
wireless secmode wep
where:
encryptionke
y
EXAMPLE:
=>wireless secmode wep
Security level WEP:
encryption key
enabled
=>
E-DOC-CTC-20061027-0012 v2.0
[encryptionkey = <quoted string>]
The secret key to be used for WEP encryption.
Two key lengths (64 or 128 bits) and two formats (alphanumeric or
hexadecimal) are permitted:
>
for 64-bit encryption:
the key must consist of 10 hexadecimal digits or 5 alphanumeric
characters
>
for 128-bit encryption:
the key must consist of 26 hexadecimal digits or 13 alphanumeric
characters.
Note If no encryptionkey is filled in, then the default encryptionkey is
used.
: FFA22E9CCA
: yes
OPTIONAL
831