Atm Oam Modify - THOMSON ST780 WL Cli Reference Manual

atm oam modify

Modify the ATM OAM data blocking mode.
SYNTAX:
atm oam modify
where:
port The port for which OAM blocking is configured.
Choose between:
>
DSL0
Or specify a port number (dsl0 has port number 0).
blocking Enable or disable the OAM data blocking mode on this port.
The default is enabled.
46
port = <{dsl0} or number>
blocking = <{disabled | enabled}>
ATM Commands
REQUIRED
REQUIRED
E-DOC-CTC-20061027-0012 v2.0