Dhcp Server Debug Stats - THOMSON ST780 WL Cli Reference Manual

dhcp server debug stats

Show the DHCP server statistics.
SYNTAX:
dhcp server debug stats
EXAMPLE:
=>dhcp server stats
DHCP Server State:
DHCP server statistics:
Corrupted packet recv
DISCOVER
REQUEST
DECLINE
RELEASE
INFORM
Pure BOOTP REQUESTS
Other message types
OFFERs sent
ACKs sent
NAKs sent
Relay agent options dropped
Lease table got full
Ping table got full
Second dhcp server seen : no
Total size of lease table: 32, in use: 16, free: 50 %
=>
DESCRIPTION:
>
DHCP server state: the state of the DHCP server.
>
Corrupted packet recv: the number of corrupted packets (not complaint to RFC2131) received from the
LAN.
>
DISCOVER: the number of DHCP server discovery packets received from the LAN. These broadcasts are
sent by potential DHCP clients to locate available DHCP servers.
>
REQUEST: the number of DHCP address lease requests received from the Local Area Network (LAN).
>
DECLINE: the number of DHCP address lease requests declined.
>
RELEASE: the number of DHCP address release requests received from DHCP clients.
>
INFORM: the number of information requests received from DHCP clients.
>
Pure BOOTP requests: the number of BOOTP requests received from the LAN.
>
Other message types: the number of other messages received from the LAN.
>
OFFERs sent: the number of IP address offers sent in reply to DHCP requests.
>
ACKs sent: the number of ACKnowledgement replies sent to successfully configured DHCP clients.
>
NAKs sent: the number of Not-AcKnowledgement replies sent to wrongly configured DHCP clients.
>
Relay agent options dropped
>
Lease table got full: whether the maximum number of DHCP leases is reached or not.
154
Stopped
: 0
: 2451
: 28
: 0
: 22
: 1
: 2
: 0
: 2451
: 19
: 0
: 0
: no
: no
DHCP Commands
E-DOC-CTC-20061027-0012 v2.0