Sntp List - THOMSON ST780 WL Cli Reference Manual

sntp list

List the NTP servers.
SYNTAX:
sntp list
EXAMPLE:
=>sntp list
IP Address
100.101.110.111
100.101.110.112
100.101.110.113
=>
DESCRIPTION:
The status of an NTP server can be:
>
Not used: The Thomson ST SNTP client is disabled. As a consequence, none of the NTP servers are used.
>
Contacting...: The Thomson ST SNTP client is trying to contact this NTP server.
>
Unable to contact: The Thomson ST SNTP client is unable to contact this NTP server. It may be down, or
no end-to-end connectivity exists (no connection, no DSL,...).
>
Synchronized: The Thomson ST SNTP client was able to contact this NTP server. If required the internal
clock has been synchronized with this NTP server.
RELATED COMMANDS:
sntp add
sntp delete
720
Version Status
4 contacting ...
4 Unable to contact
4 Synchronized
Add a Network Time Protocol (NTP) server to the NTP server list.
Delete an NTP server from the NTP server list.
Name
SNTP Commands
E-DOC-CTC-20061027-0012 v2.0