Eth Switch Qos Config - THOMSON ST780 WL Cli Reference Manual

eth switch qos config

Configure common qos parameters.
SYNTAX:
eth switch qos config
where:
state
nbrOfQueues
realtime
RELATED COMMANDS:
eth switch qos ifconfig
eth switch qos list
eth switch qos weights
316
state = <disabled|enabled>
[nbrOfQueues = <number{0-4}>]
[realtime = <disabled|enabled>]
Enable or disable QoS
Number of QoS queues
Enable or disable real time
Configure per port QoS parameters.
Display QoS configuration.
Configure the queue weights.
Eth Commands
REQUIRED
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0