Connection Appconfig - THOMSON ST780 WL Cli Reference Manual

connection appconfig

Configure the available CONN/NAT application helpers.
SYNTAX:
connection appconfig
where:
application
trace
timeout
floating
childqos
tracelevel
SIP_ALG
RTP_predict_for_term_SIP_ALG
82
application = <string>
[trace = <{disabled | enabled}>]
[timeout = <number{0-32000}>]
[floating = <{disabled | enabled}>]
[childqos = <{DSCP|Interactive|
Management|Video|VoIP|default}>]
[tracelevel = <number{1-4}>]
[SIP_ALG = <{disabled|enabled}>]
[RTP_predict_for_term_SIP_ALG =
<{disabled|enabled}>]
The name of a CONN/NAT application helper.
Use the command :connection
Tip
applist to obtain a list of CONN/NAT
application helpers.
Enable or disable CONN/NAT application helper
traces.
The default is enabled.
A number between 0 and 32000 (seconds).
Represents the maximum timeout to keep
predicted child connections around.
Enable / disabled floating port for IKE helper.
Used QOS label for the predicted child connections.
A number between 1 and 4.
Represents the SIP trace level.
Choose between:
>
1: feature errors
>
2: feature traces
>
3: all errors
>
4: all traces.
The default is 1.
SIP only: enable/disable traditional sip alg
behaviour
Enable/disable RTP connection prediction for
terminated SIP
Connection Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0