Script Commands - THOMSON ST780 WL Cli Reference Manual

Script Commands

32 Script Commands
Introduction
This chapter describes the commands of the script command group.
Scripting is not a general purpose mechanism but is only used in the autoPVC/ILMI mechanism.
!
It is recommended not to change the default scripts.
Contents
This chapter covers the following commands:
script add
script delete
script flush
script list
script run
E-DOC-CTC-20061027-0012 v2.0
Add a line to a script.
Delete a complete script or a line from a script.
Flush all scripts.
Display a script or all scripts.
Run a script.
622
623
624
625
627
621