Firewall Level Add - THOMSON ST780 WL Cli Reference Manual

Hide thumbs Also See for ST780 WL:
Table of Contents

Advertisement

firewall level add

Add a security level.
SYNTAX:
firewall level add
where:
name
index
readonly
udptrackmode
proxy
service
text
RELATED COMMANDS:
firewall level delete
firewall level list
360
name = <string>
[index = <number>]
[readonly = <{disabled | enabled}>]
[udptrackmode = <{strict | loose}>]
[service = <{disabled | enabled}>]
[proxy = <{disabled|enabled}>]
[text = <quoted string>]
The name of the security level to be added.
The index of the security level.
Use the command :firewall level list to
Tip
obtain a list of indexes.
Note
If not specified, the new security level will be added at
the bottom of the list.
Select whether the security level is readonly (enabled) or not
(disabled).
The default is enabled.
Select the UDP connection tracking mode.
Choose between:
>
strict: replies to a request from a client must be in a specific
window to the client.
>
loose: inbound packets are allowed on the port that was
first used to start the communication with the server (for
example to allow a client of an online game to obtin peer-
to-peer information from other clients of that same online
game).
The default is strict.
Enable or disable proxy system services for this security level.
Disable or enable host service definitions.
The default is disabled.
Description of the security level.
Note
The maximum length is 39 characters.
Delete a security level.
List all the security levels.
Firewall Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents