Eth Switch Mirror Ingress - THOMSON ST780 WL Cli Reference Manual

Eth Commands

eth switch mirror ingress

Enable or disable the specified port to be the Mirror Ingress Port.
i
SYNTAX:
eth switch mirror ingress
where:
port
state
EXAMPLE:
Here port 2 is enabled as Mirror Ingress Port
=>eth switch mirror ingress port=2
=>eth switch mirror ingress
Ingress mirror port = 2
=>
Here port 2 is disabled as Mirror Ingress Port
=>eth switch mirror ingress
Ingress mirror port = 2
=>eth switch mirror ingress port=2 state=disabled
=>eth switch mirror ingress
=>
RELATED COMMANDS:
eth switch mirror capture
eth switch mirror egress
E-DOC-CTC-20061027-0012 v2.0
Only one port can be the Mirror Ingress Port at any one time.
But a port can be the Mirror Egress Port and the
Mirror Ingress Port at the same time.
The port to be the Mirror Ingress Port.
Note If no port number is specified, then the port number of
the current Mirror Ingress Port is shown.
Enable or disable the port as Mirror Ingress Port.
The default is enabled.
Define the specified port to be the Mirror Capture Port.
Enable or disable the specified port to be the Mirror Egress Port.
port = <number{1-4}>
[state = <{enabled | disabled}>]
REQUIRED
OPTIONAL
311