Grp Rip Config - THOMSON ST780 WL Cli Reference Manual

GRP Commands

grp rip config

Configure the RIP settings.
SYNTAX:
grp rip config
where:
state
version
defmetric
updatetime
timeouttime
garbagetime
impcrt
impkrt
E-DOC-CTC-20061027-0012 v2.0
state = <{disabled | enabled}>
[version = <{rip_unspec | rip_v1 | rip_v2}>]
[defmetric = <number{1-16}>]
[updatetime = <number{1-3600}>]
[timeouttime = <number{1-3600}>]
[garbagetime = <number{1-3600}>]
[impcrt = <{disabled | enabled}>]
[impkrt = <{disabled | enabled}>]
[impsrt = <{disabled | enabled}>]
[impdefkrt = <{disabled | enabled}>]
[impdefsrt = <{disabled | enabled}>]
[exprt = <{disabled | enabled}>]
[expdefrt = <{disabled | enabled}>]
[txdefrt = <{disabled | enabled}>]
[trace = <{disabled | enabled}>]
Enable or disable the RIP daemon.
The default is enabled.
Configure the RIP version to be applied.
Choose between:
>
rip_unspec: No RIP version is specified as such. The actual RIP
version to be used is negotiated with the remote side.
>
rip_v1: RIP version 1 is used.
>
rip_v2: RIP version 2 is used.
The default is rip_v2.
A number between 1 and 16 (hops).
Represents the default RIP metric for imported routes.
The default is 1.
A number between 1 and 3600 (seconds).
Represents the update timer value of the RIP routing table.
The default is 30.
A number between 1 and 3600 (seconds).
Represents the timeout timer value of the RIP routing info.
The default is 180.
A number between 1 and 3600 (seconds).
Represents the garbage collection timer value.
The default is 120.
Enable or disable the import of connected routes.
The default is enabled.
Enable or disable the import of kernel routes.
The default is enabled.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
381