Traceroute - THOMSON ST780 WL Cli Reference Manual

Root Commands

traceroute

Send ICMP/UDP packets to trace the IP path.
SYNTAX:
traceroute
where:
addr
count
size
interval
maxhops
dstport
maxfail
type
utime
E-DOC-CTC-20061027-0012 v2.0
addr = <ip-address>
[count = <number{1-10}>]
[size = <number{1-20000}>]
[interval = <number{1000-60000}>]
[maxhops = <number{1-255}>]
[dstport = <number{1-65535}>]
[maxfail = <number{0-255}>]
[type = <{icmp | udp}>]
[utime = <{disabled | enabled}>]
The destination IP address.
A number between 1 and 10.
Represents the number of times to reissue a traceroute request with the
same TTL.
The default is 3.
A number between 1 and 20000 (bytes).
Represents the size of the traceroute packet(s).
The default is 1.
A number between 1000 and 60000 (milliseconds).
Represents the intermediate interval between two packets.
The default is 1000.
A number between 1 and 255.
Represents the maximum number of routers through which a packet can
pass.
The default is 30.
A number between 1 and 65535.
Represents the UDP destination port number to send to.
A number between 0 and 255.
Represents the maximum number of consecutive timeouts allowed
before terminating a traceroute request.
The default is 5.
The type of traceroute packet(s).
Choose between:
>
icmp
>
udp.
The default is icmp.
Display time in useconds (enabled) or not (disabled).
The default is enabled.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
5