Eth Bridge Macadd - THOMSON ST780 WL Cli Reference Manual

Eth Commands

eth bridge macadd

Add a static MAC address to a bridge interface.
This command allows to manually add static MAC addresses, which should normally be dynamically
discovered by the bridge itself.
SYNTAX:
eth bridge macadd
where:
brname
intf
hwaddr
vlan
E-DOC-CTC-20061027-0012 v2.0
[brname = <{bridge}>]
intf = <string>
hwaddr = <hardware-address>
[vlan = <string>]
The name of a bridge instance.
The name of the bridge interface to which the MAC address must
be added.
The Ethernet MAC address of the new entry.
The VLAN.
OPTIONAL
REQUIRED
REQUIRED
OPTIONAL
287