Dns Server Route Add - THOMSON ST780 WL Cli Reference Manual

DNS Commands

dns server route add

Creates a DNS forwarding entry or template.
SYNTAX:
dns server route add
where:
dns
src
srcmask
domain
metric
intf
E-DOC-CTC-20061027-0012 v2.0
dns = <ip-address>
[src = <ip-address>]
[srcmask = <ip-mask(dotted or cidr)>]
[domain = <string>]
[metric = <number{0-100}>]
[intf = <string>]
The IP address of a DNS server. If 0.0.0.0 is used, the entry becomes a
DNS-Template which is instantiated if DNS Server IPs are configured
on an IP interface.
The source IP address(es) using this remote DNS server. If specified,
only DNS queries from machines of which the source IP address
matches the source prefix of the DNS entry will be forwarded to the
corresponding DNS server.
Note Supports IP/mask notation.
The source IP address mask.
The DNS Domain matching string. If configured, only those DNS
queries of which the domain name in the query matches with the
string configured for the entry will be forwarded to the corresponding
DNS Server. Maximum string length: 62 characters.
A number between 0 and 100. Represents the metric (weight factor) for
this DNS route. The DNS Entry List is sorted on DNS Metric: the lower
the metric, the higher the priority of the entry.
An interface name.
The interface associated with the DNS entry or DNS Template. DNS
queries will only be forwarded on the specified interface.
Note In no interface is specified, DNS queries will be forwarded on
all interfaces.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
205