Dsd Urlfilter Config - THOMSON ST780 WL Cli Reference Manual

DSD Commands

dsd urlfilter config

Display/modify the URL filtering configuration.
SYNTAX:
dsd urlfilter config
where:
state
blockproxy
blockipaddr
ess
blockobscur
edip
defaultactio
n
EXAMPLE:
=>dsd urlfilter config
Filter state
Block proxy traffic
Block IP addr
Block obscured IP addr
Default action
=>
E-DOC-CTC-20061027-0012 v2.0
[state = <{disabled | enabled}>]
[blockproxy = <{disabled | enabled}>]
[blockipaddress = <{disabled | enabled}>]
[blockobscuredip = <{disabled | enabled}>]
[defaultaction = <{block | accept}>]
Enable or disable URL filtering.
The default is enabled.
Enable or disable blocking of HTTP requests via a proxy server.
The default is disabled.
Enable or disable blocking of HTTP requests if host name is IP address.
The default is disabled.
Enable or disable blocking of HTTP requests if host name is believed to
be an IP address.
The default is disabled.
Select the action to be performed when no filter is applicable.
Choose between:
>
block
>
accept.
The default is accept.
: enabled
: disabled
: disabled
: disabled
: accept
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
221