Dhcp Relay Config - THOMSON ST780 WL Cli Reference Manual

DHCP Commands

dhcp relay config

Set the DHCP relay configuration settings.
SYNTAX:
dhcp relay config
where:
agentinfo
agentmismatch
EXAMPLE:
=>dhcp relay config
Agent info status : disabled
Drop agent info mismatch status : disabled
=>dhcp relay config agentinfo=enabled
=>dhcp relay config
Agent info status : enabled
Drop agent info mismatch status : disabled
=>
E-DOC-CTC-20061027-0012 v2.0
[agentinfo = <{disabled | enabled}>]
[agentmismatch = <{disabled | enabled}>]
Set the relay agent info status (RFC3046) enabled or disabled.
The default is disabled.
Forward/drop DHCP reply packet when a relay agent info
mismatch is detected (RFC3046) (enabled) or not (disabled).
The default is disabled.
OPTIONAL
OPTIONAL
135