Eth Bridge Config - THOMSON ST780 WL Cli Reference Manual

eth bridge config

Modify/display the bridge configuration settings.
SYNTAX:
eth bridge config
where:
brname
age
filter
vlan
precedencemap
266
[brname = <{bridge}>]
[age = <number{10-100000}>]
[filter = <{no_WAN_broadcast | none}>]
[vlan = <{disabled | enabled}>]
[precedencemap = <string>]
The name of a bridge instance
A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned Medium Access
Control (MAC) address.
The default is 300.
The bridge filter to be applied for all Wide Area Network (WAN)
bridge ports.
Choose between:
>
no_WAN_broadcast: broadcasts from the Thomson ST itself
to the WAN are filtered out, broadcasts from the LAN to the
WAN are still passed through
>
none: no broadcasts are filtered out.
The default is no_WAN_broadcast.
Enable or disable the use of the VLAN ID of the received VLAN
packets.
The default is enabled.
The IP QoS precedence mapping table
Eth Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0