Dhcp Server Lease Add - THOMSON ST780 WL Cli Reference Manual

DHCP Commands

dhcp server lease add

Add a DHCP server lease.
SYNTAX:
dhcp server lease add
where:
clientid
pool
addr
offset
leasetime
expiretime
gateway
macaddr
E-DOC-CTC-20061027-0012 v2.0
clientid = <client-id>
pool = <string>
[addr = <ip-address>]
[offset = <number>]
[leasetime = <number>]
[expirytime = <number>]
[gateway = <ip-address>]
[macaddr = <hardware-address>]
The DHCP client identification string of the booting host.
The name of the DHCP server pool from which the DHCP lease
should be taken.
Use the command :dhcp server pool list to
Tip
obtain a list of available DHCP server pools.
The favoured IP address for this DHCP host.
This IP address, if specified, must be in the range of the
specified DHCP server pool.
A number between 0 and the integer number defined by the
number of available IP addresses in the DHCP server pool.
Represents the IP address offset in the DHCP server pool
preserved for this host.
Note Not specifying this parameter does not preserve an IP
address for the host.
A number (of seconds).
Represents the time the host is allowed to use this address.
Note 0 means infinite leasetime.
The time in seconds the DHCP server keeps the lease reserved
Tip 0 means infinite expirytime.
The IP address of the default router for this client.
The MAC address of the host.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
157