Ppp Iflist - THOMSON ST780 WL Cli Reference Manual

ppp iflist

Display the PPP interfaces.
SYNTAX:
ppp iflist
where:
intf
string
beginstring
EXAMPLE INPUT/OUTPUT :
=>ppp iflist
Internet: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd demanddial
dns metric = 0
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
acname : ---
Rt_PPPoA: dest : RtPPPoA_atm
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
admin state = up
LCP : state = reqsent
IPCP: state = initial
=>
RELATED COMMANDS:
ppp ifadd
ppp ifdelete
600
[intf = <intfname>]
[string = <string>]
[beginstring = <string>]
The name of the PPP interface.
Note If not specified, all PPP interfaces are shown.
string matching condition
beginstring matching condition
[00:00:00]
mru = 1492 Tx inactivity = 1200s
user = password =
oper state = down
retransm = 10
retransm = 0
service : ---
[00:00:00]
mru = 1500
user = johndoe@ISP password = ********
oper state = down
retransm = 1
retransm = 0
Create a new PPP interface.
Delete a PPP interface.
left = 0s
link state = not-connected
term. reason =
term. reason =
link state = connected
term. reason =
term. reason =
PPP Commands
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20061027-0012 v2.0